Past Projects (Click on the photos for a larger view)
Equipment: 3- Smog Hog SHN 20- 2000cfm each and 1 Smog SHN 40- 4000 cfm
Electrostatic Precipitators
Contaminant: Smoke from forming of plastic bags
Prior
to the SHN installation the company exhausted the fumes outdoors using
exhaust fans through the roof. These exhaust fans also exhaust the heat for
the building causing cold drafts to infiltrate and the employees had to wear
jackets in the plant.
Now the Electrostatic Precipitators are
capturing the exhausted smoke on collection cells in the EP and
re-circulation the cleaned in the plant. Saving on heat and not putting the
plant in a negative pressure.
Northeast Packaging is very satisfied with the
performance of these Air Cleaners selected and provided by DSHAY Air Systems
Inc.
Bucksport High School, Maine
Aireau Shaker Dust Collector
WoodWorking Shop with Kirk Blum Clamp Duct System. Duct Installed by Down
East Sheet Metal & Certified Welding, Brewer Maine.
DSHAY Air Systems provided duct layout.
New Hampshire Pharmaceutical Company
Dust Collection for tablet lines. United Air Specialist Model SFC-2-6 with
bag out collars used in filter change out. Systems design provided by DSHAY Air
Systems Inc. Installation was performed by in house personnel.
Vermont Hospital
United Air Specialist Model BD 22P Bag House dust
collector for wood working shop in a VA Hospital
Plasma Cutting & Weld Fume Collection
Both Collectors have a capacity of 11,000 cfm The
48 cartridge unit is for Plasma Fumes with an Air to Media ratio of 0.8:1 and
the 24 cartridge unit is 1.79:1 Air to media Ratio.
Northern Maine Saw Mill
This 3000 CFM systems was installed to capture
saw dust at the saw cutting logs. Systems is equipped with a spark detection
system and Abort Damper allowing the company to return the air to the building
Textile Facility
Clamp Together Duct Systems designed by DSHAY Air
Systems and installed by a local sheet metal contractor.
Cabinet Making Shop
Cabinet Making shop using a Torit UMA 750 Dust
Collector 3500 cfm 10 hp. Duct work is Kirk & Blum Clamp Duct. System designed
by Bob Deshaies and provided the owners with a detail drawing of the duct
layout. The KB Duct was installed by the owners, who had no prior experience in
installing ductwork.
Gagne Pre-Cast Concrete Mixing Plant
Re-designed capture hoods and properly sized ductwork with new dust
collector. Mixing operators no longer needed dust mask when mixing concrete.
Steel Fabrication Facility, Northern Maine
This unit is a UAS SFC model 24-3 rated for
12,000 cfm with a ground mount Cincinnati fan. This systems uses Kirk & Blum
clamp duct system and Max Source articulating fume arms 8" diameter x 14 '
long.The systems captures weld smoke and grinding dust in a steel
fabrication facility making logging trailer. Facility also includes 3 United
Air Specialist dust control booths model MCB providing dust control in steel
sanding and blasting area.
Bader Grinders
Pedestal grinders and a number of polishing
machines polishing carbon steel and stainless steel. One system was provided
with Kirk & Blum Clamp Duct systems and the other was provided with standard
spiral duct. Both duct systems were designed by DSHAY Air Systems Inc. Dust
Collector was a Torit DFO 2-16 designed for 5000 cfm.
Gagne Belgrade
The Dust Collector is a UAS Model SCF-12-3
Equipped with abrasion Inlet. The unit is rated for 3000 cfm. The Dust
collected is from cement dust being loaded into a cement truck. After
the dust collector was installed, the operators no longer needed a dust mask
during the loading operation. The capture hood was a custom designed slot
style hood wit a slot velocity of 2000 fpm.
Columbia Forest
This is a Cyclone with after filter in a
woodworking application.
Tom's of Maine
UAS Model SFC-6-2 Short Drum with
side mounted fan and silencer. Unit is equipped with side mounted explosion and
ducted outdoors. SFC-6-2 is rated for 3000 cfm
|
